Theses most similar to those of author McKay, Ian Salmon

A mm-scale aeroelastic oscillation-based anemometer (2012) read it

Preliminary performance characteristics of a microfabricated turbopump

Diez, Shana, 1980- (2003)

  • Advisor: Alan H. Epstein
  • Department of Aeronautics and Astronautics
Read it

A leak detecting technique utilizing an abrupt and large pressure drop

Torres, James (2010)

  • Advisor: Dr. Kamal Youcef-Toumi
  • Department of Mechanical Engineering
Read it

Analyzing the operating efficiency of autonomous water vehicles

Fraser, Michael B. (Michael Brent) (2011)

  • Advisor: Henrik Schmidt, James H. Williams, Jr.
  • Department of Mechanical Engineering
Read it

Design of a free-running, 1/30th Froude scaled model destroyer for in-situ hydrodynamic flow visualization

Cope, David M. (David Michael) (2012)

  • Advisor: Chryssostomos Chryssostomidis
  • Department of Mechanical Engineering
Read it

Propeller design optimization for tunnel bow thrusters in the bollard pull condition

Wilkins, James R., IV (2012)

  • Advisor: Chryssostomos Chryssostomidis
  • Department of Mechanical Engineering
Read it

Experimental analysis of an energy self sufficient ocean buoy utilizing a bi-directional turbine

Gruber, Timothy J. (Timothy James) (2012)

  • Advisor: Alexandra Techet
  • Department of Mechanical Engineering
Read it

A monolithically integrated thermo-adsorptive battery (2014) read it

Design of parallel plate condensers with sintered wicks for a loop heat pipe

Koveal, Catherine Helene (2010)

  • Advisor: Evelyn N. Wang
  • Department of Mechanical Engineering
Read it

Condensation heat transfer on nanoengineered surfaces

Paxson, Adam Taylor (2011)

  • Advisor: Kripa K. Varanasi
  • Department of Mechanical Engineering
Read it

Effect of fabrication parameters on thermophysical properties of sintered wicks

Domínguez Espinosa, Francisco Alonso (2011)

  • Advisor: John G. Brisson
  • Department of Mechanical Engineering
Read it

Condensation on superhydrophobic copper oxide nanostructures

Dou, Nicholas (Nicholas Gang) (2012)

  • Advisor: Evelyn N. Wang
  • Department of Mechanical Engineering
Read it

Manufacturing and characterization of welded, sintered condensers for a loop heat pipe

Sircar, Jay D (2013)

  • Advisor: Evelyn N. Wang
  • Department of Mechanical Engineering
Read it

Advanced materials for enhanced condensation heat transfer

Paxson, Adam Taylor (2014)

  • Advisor: Kripa K. Varanasi
  • Department of Mechanical Engineering
Read it

Experimental characterization of adsorption and transport properties for advanced thermo-adsorptive batteries

Kim, Hyunh (2014)

  • Advisors: Evelyn N. Wang; James C. Preisig
  • Department of Mechanical Engineering
Read it

Fabrication and robustness testing of superhydrophobic nanostructured surfaces for enhanced jumping condensation

Sack, Jean H. (Jean Hope) (2015)

  • Advisor: Evelyn N. Wang
  • Department of Mechanical Engineering
Read it

Small-scale Advanced Thermo-Adsorptive Battery prototype

Umans, Ari S (2015)

  • Advisor: Evelyn N. Wang
  • Department of Mechanical Engineering
Read it

Evaporation from nanoporous membranes

Wilke, Kyle (Kyle L.) (2016)

  • Advisor: Evelyn Wang
  • Department of Mechanical Engineering
Read it