Theses most similar to those of author Kariya, H. Arthur (Harumichi Arthur)
Development of a multi-regime tribometer and investigation of zinc dialkyldithiophosphate tribofilm development in the presence of overbased calcium sulfonate (2009) read it
The synthesis and characterization of model interface couples for inorganic matrix composite applications
Chambers, Brent Victor (1994)
- Advisor: Ali S. Argon
- Department of Materials Science and Engineering
- Advisors: Emanuel M. Sachs; Samuel M. Allen
- Department of Mechanical Engineering
Photo-electroforming, a new manufacturing process for micro-electro-mechanical systems
Tsao, Che-Chih (1994)
- Advisor:
- Department of Mechanical Engineering
Effect of directed port air flow on liquid fuel transport in a port fuel injected spark ignition engine
Scaringe, Robert J. (Robert Joseph) (2007)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Combustion chamber deposit effects on hydrocarbon emissions from a spark-ignition engine
Haidar, Haissam Ali (1997)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
- Advisors: Jack B. Howard; Jack P. Longwell
- Department of Chemical Engineering
- Advisors: Thomas W. Eagar; Vien Nguyen
- Department of Mechanical Engineering
The parallel oxidation of carbon and chromium in liquid iron (1600C̊).
Barnhardt, Lyall Franklin (1965)
- Advisor: Thomas B. King
- Department of Metallurgy
Study of lubrication oil ignition in a rapid compression machine under sporadic pre-ignition conditions
Sullivan, Morgen Paul (2015)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Slurry based Three Dimensional Printing (S-3DP tm) of tungsten carbide cobalt
Oliveira, Mark A. (Mark Anthony), 1977- (2002)
- Advisor: Michael J. Cima
- Department of Materials Science and Engineering
Development of an air-cooled, loop-type heat pipe with multiple condensers (2012) read it
- Advisor: Alan H. Epstein
- Department of Aeronautics and Astronautics
Heat pump simulation model and optimal variable-speed control for a wide range of cooling conditions
Zakula, Tea (2010)
- Advisor: Leslie K. Norford
- Department of Architecture
Design, fabrication, and characterization of a MEMS steam-generating device based on the decomposition of high-test hydrogen peroxide
Eid, Feras (2010)
- Advisor: Carol Livermore
- Department of Mechanical Engineering
- Advisor: Martin A. Schmidt
- Department of Electrical Engineering and Computer Science
Design of an axial turbine and thermodynamic analysis and testing of a K03 turbocharger
Perez Zuñiga, Yoshio Samaizu (2011)
- Advisor: John H. Lienhard, V., Joseph L. Smith, Jr.
- Department of Mechanical Engineering
Design, fabrication, and characterization of a multi-condenser loop heat pipe
Hanks, Daniel Frank (2012)
- Advisor: Evelyn N Wang
- Department of Mechanical Engineering
- Advisor: J.G. Brisson
- Department of Mechanical Engineering
Wetting and phase-change phenomena on micro/nanostructures for enhanced heat transfer
Xiao, Ron (2012)
- Advisor: Evelyn N. Wang
- Department of Mechanical Engineering
Development of a compensation chamber for use in a multiple condenser loop heat pipe
Roche, Nicholas Albert (2013)
- Advisor: John G. Brisson
- Department of Mechanical Engineering
Manufacturing and characterization of welded, sintered condensers for a loop heat pipe
Sircar, Jay D (2013)
- Advisor: Evelyn N. Wang
- Department of Mechanical Engineering