Theses most similar to those of author Hahn, Tairin

Study of low-temperature-combustion diesel engines as an on-board reformer for intermediate temperature Solid Oxide Fuel Cell vehicles (2006) read it

Design of a viable homogeneous-charge compression-ignition (HCCI) engine : a computational study with detailed chemical kinetics

Yelvington, Paul E., 1977- (2004)

  • Advisors: Jefferson W. Tester; T. Alan Hatton, William H. Green, Jr.
  • Department of Chemical Engineering
Read it

Managing transient behaviors of a dual mode spark ignition-- controlled auto ignition engine with a variable valve timing system

Santoso, Halim G. (Halim Gustiono), 1975- (2005)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Effects of operating conditions, compression ratio, and gasoline reformate on SI engine knock limits

Gerty, Michael D (2005)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Combustion lean limits fundamentals and their application to a SI hydrogen-enhanced engine concept

Ayala, Ferran A. (Ferran Alberto), 1976- (2006)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Examination of the high load limit of an HCCI engine

Anderson, Nathan (Nathan Charles) (2008)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Extension of the high load limit in the Homogeneous Charge Compression Ignition engine

Scaringe, Robert J. (Robert Joseph) (2009)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Effect of market fuel variation and cetane improvers on CAI combustion in a GDI engine

Cedrone, Kevin David (2010)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Knock mitigation on boosted Controlled Auto-Ignition engines with fuel stratification and Exhaust Gas Recycling

Sang, We (2013)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

A fundamental study of relationships among fuel properties, combustion characteristics and emission with normal and synthetic diesel fuel

Llaniguez, Jeremy T. (Jeremy Tolentino), 1979- (2003)

  • Advisor: Alan J. Brown, Victor W. Wong
  • Department of Mechanical Engineering
Read it

Chemical kinetic modeling of oxy-fuel combustion of sour gas for enhanced oil recovery

Bongartz, Dominik (2014)

  • Advisor: Ahmed F. Ghoniem
  • Department of Mechanical Engineering
Read it

Ignition study in rapid compression machine (2008) read it

Knock behavior of a lean-burn hydrogen-enhanced engine concept

Topinka, Jennifer A. (Jennifer Ann), 1977- (2003)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Effect of ambient conditions and fuel properties on homogeneous charge compression ignition engine operation

Andreae, Morgan M. (Morgan MacKenzie) (2006)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Assessing the hydrocarbon emissions in a homogeneous direct injection spark ignited engine

Radovanovic, Michael S (2006)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Effect of directed port air flow on liquid fuel transport in a port fuel injected spark ignition engine

Scaringe, Robert J. (Robert Joseph) (2007)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Effects of different fuels on a turbocharged, direct injection, spark ignition engine

Negrete, Justin E (2010)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Knock mitigation on boosted Controlled Auto-Ignition engines with fuel stratification and Exhaust Gas Recycling

Sang, We (2013)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Fuel metering effects on hydrocarbon emissions and engine stability during cranking and start-up in a port fuel injected spark ignition engine

Castaing, Brigitte Marie Paule, 1977- (2001)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Data base generation and modeling of Homogeneous Charge Compression Ignition using a rapid compression machine

Ayala, Ferran A. (Ferran Alberto), 1976- (2001)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Syngas production using a catalytic engine

Arce, Andrea, S.B (2015)

  • Advisor: John G. Brisson
  • Department of Mechanical Engineering
Read it

Reducing cold start hydrocarbon emissions from port fuel injected spark ignition engines with improved management of hardware & controls

Lang, Kevin R., 1980- (2006)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it