Theses most similar to those of author Dirckx, Matthew E
Design of a fast cycle time hot micro-embossing machine (2005) read it
- Advisor: David E. Hardt
- Department of Mechanical Engineering
On the development of a universal automated fixturing system through encapsulation techniques
Lee, Elmer C., 1973- (2001)
- Advisor: Sanjay E. Sarma
- Department of Mechanical Engineering
Fabrication process for openable microfluidic devices and externally actuated microfluidic switch
Cartas Ayala, Marco Aurelio (2008)
- Advisors: Daniel J. Ehrlich; Todd Thorsen
- Department of Mechanical Engineering
Centrifugal casting and fast curing of polydimethylsiloxane (PDMS) for the manufacture of micro and nano featured components
Mazzeo, Aaron D. (Aaron David), 1979- (2009)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
The development of an innovative bonding method for microfluidic applications
Lustrino, Michelle E. (Michelle Elizabeth) (2011)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
Development of an encapsulation process for use in a universal automated fixturing system
Lee, Elmer C., 1973- (1999)
- Advisor: Sanjay E. Sarma
- Department of Mechanical Engineering
Design and measurement analysis of hot embossing system for high aspect ratio microfluidics
Ragosta, Nicholas (Nicholas Hiroshi) (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Hot embossing as a method for rapid prototyping microfluidic devices
Nguyen, Khanh H. (Khanh Huy) (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Design and process optimization of a hot embossing machine for microfluidics with high aspect ratios
Kalsekar, Viren Sunil (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Development of a low-cost, rapid-cycle hot embossing system for microscale parts
Hale, Melinda (Melinda Rae) (2009)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
Demolding of hot embossed polymer microstructures (2010) read it
Tribological and mechanical characterizations of polyelectrolyte multilayer nanoassemblies
Pavoor, Prem Venkatachalam (2003)
- Advisors: Anuj Bellare; Robert E. Cohen
- Department of Chemical Engineering
Methods for increasing the thermal conductivity of ultra-high molecular weight polyethylene (UHMWPE)
Miler, Josef L (2006)
- Advisor: Gang Chen
- Department of Mechanical Engineering
Sliding contact at plastically graded surfaces and applications to surface design
Prasad, Anamika, 1979- (2007)
- Advisor: Subra Suresh
- Department of Civil and Environmental Engineering
Fabrication and material characterization of silver cantilevers via direct surface micromachining
Lam, Eric W. (Eric Wing-Jing) (2008)
- Advisor: Martin A. Schmidt
- Department of Electrical Engineering and Computer Science
Development of adhesive bonding and functional testing systems for in-process inspection of hot embossed microfluidic devices
Reyda, Caitlin J. (Caitlin Jilaine) (2014)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
The effect of surface roughness on the precision of the encapsulated fixturing system
Fan, Winston Chi Hang, 1975- (2000)
- Advisor: Sanjay E. Sarma
- Department of Mechanical Engineering
Predictive design and fabrication of complex micro and nano patterns via wrinkling for scalable and affordable manufacturing
Saha, Sourabh Kumar (2014)
- Advisor: Culpepper, Martin L. (Martin Luther)
- Department of Mechanical Engineering