Theses most similar to those of author Miller, Thomas C. (Thomas Charles)
Characterization of lube oil derived diesel engine particulate emission rate vs. lube oil consumption (1996) read it
Effect of fuel properties on the first cycle fuel delivery in a Port Fuel Injected Spark Ignition Engine
Lang, Kevin R., 1980- (2004)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Diesel engine instantaneous oil consumption measurements using the sulfur dioxide tracer technique
Schofield, Douglas M. (Douglas MacLean) (1995)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
Effect of engine operating parameters and fuel characteristics on diesel engine emissions
Acar, Joseph, 1977- (2005)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering
Oxidation and hydrolysis reactions in supercritical water : chlorinated hydrocarbons and organosulfur compounds
Lachance, Russell Philip (1995)
- Advisor: Jefferson Tester
- Department of Chemical Engineering
Analysis of fuel behavior in the spark ignition engine start-up process
Sampson, Michael J. (Michael James) (1994)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Effect of ambient conditions and fuel properties on homogeneous charge compression ignition engine operation
Andreae, Morgan M. (Morgan MacKenzie) (2006)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
The effects of lubrication system parameters and exhaust aqueous injection on diesel engine oil consumption and emissions
Ford, Eric J. (Eric John) (1995)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
Assessment of a sulfur dioxide based diagnostic system in characterizing real time oil consumption in a diesel engine
Jackson, Mark A. (Mark Alan) (1996)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
- Advisor: Sione Hochgreb
- Department of Mechanical Engineering
- Advisor: John G. Brisson
- Department of Mechanical Engineering