Theses most similar to Study of deposit formation inside diesel injectors nozzles (Wang, YinChu; 2012) read it
A visualization study of mixture preparation mechanisms for port fuel injected spark ignition engines
Costanzo, Vincent S. (Vincent Stanley), 1979- (2004)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Effect of directed port air flow on liquid fuel transport in a port fuel injected spark ignition engine
Scaringe, Robert J. (Robert Joseph) (2007)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Design and demonstration of a spark ignition engine operating in a stratified-EGR mode
Han, Sangmyeong (1997)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
PLIF investigation of the fuel distribution in gasoline direct injection fuel sprays
Shelby, Michael H. (Michael Howard) (1997)
- Advisor: Simone Hochgreb
- Department of Mechanical Engineering
Effect of in-cylinder liquid fuel films on engine-out unburned hydrocarbon emissions for SI engines
Costanzo, Vincent S. (Vincent Stanley), 1979- (2011)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Particulate matter emissions from a DISI engine under cold-fast-idle conditions for ethanol-gasoline blends
Dimou, Iason (2011)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Knock limits in spark ignited direct injected engines using gasoline/ethanol blends
Kasseris, Emmanuel P (2011)
- Advisor: John B.Heywood
- Department of Mechanical Engineering
Soot formation in direct injection spark ignition engines under cold-idle operating conditions
Ketterer, Justin Edward (2013)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Data base generation and modeling of Homogeneous Charge Compression Ignition using a rapid compression machine
Ayala, Ferran A. (Ferran Alberto), 1976- (2001)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Assessment of the factors influencing PN emission in a DISI engine under cold-start condition
Oh, Changhoon (2016)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering