Theses most similar to Dynamic stability, blowoff, and flame characteristics of oxy-fuel combustion (Shroll, Andrew Philip; 2011) read it
A model for conversting SI engine flame arrival signals into flame contours
Hadjiconstantinou, Nicolas G. (Nicholas George) (1994)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Oxidation of hydrocarbons desorbed from the lubricant oil in spark ignition engines
Norris, Michael George (1995)
- Advisor: Simone Hochgreb
- Department of Mechanical Engineering
Physics-based flame dynamics modeling and thermoacoustic instability mitigation
Altay, Hurrem Murat (2009)
- Advisor: Ahmed F. Ghoniem
- Department of Mechanical Engineering
High load limits of the controlled autoignition engine
Wildman, Craig B. E. (Craig Bradley Edward), 1987- (2009)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Extension of the high load limit in the Homogeneous Charge Compression Ignition engine
Scaringe, Robert J. (Robert Joseph) (2009)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Effects of different fuels on a turbocharged, direct injection, spark ignition engine
Negrete, Justin E (2010)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Suppression of thermoacoustic instabilities in a swirl combustor through microjet air injection
LaBry, Zachary Alexander (2010)
- Advisor: Ahmed F. Ghoniem
- Department of Mechanical Engineering
Fundamental studies in hydrogen-rich combustion : instability mechanisms and dynamic mode selection
Speth, Raymond L., 1981- (2010)
- Advisor: Ahmed F. Ghoniem
- Department of Mechanical Engineering
Turbulent flame microstructure, dynamics, and thermoacoustic instability in swirl-stabilized premixed combustion : measurements, statistics, and analysis
LaBry, Zachary Alexander (2015)
- Advisor: Ahmed F. Ghoniem
- Department of Mechanical Engineering
Impact of fuel and oxidizer composition on premixed flame stabilization in turbulent swirling flows : dynamics and scaling
Taamallah, Soufien (2016)
- Advisor: Ahmed F. Ghoniem
- Department of Mechanical Engineering