Theses most similar to Compressive strength of stiffened sheets of aluminum alloy (Gall, Harbert W; 1930) read it
Testing and analysis of a novel spur gear design using double integral bearing raceways
Richter-Allen, Astrid (1996)
- Advisor: David M. Parks
- Department of Mechanical Engineering
Effect of concentrated loads on shallow buried polyvinyl chloride and polyethylene tubing.
McGrath, Timothy James (1975)
- Advisor: Herbert H. Einstein
- Department of Civil and Environmental Engineering
Damage tolerance and arrest characteristics of pressurized graphite/epoxy tape cylinders
Ranniger, Claudia Ute (1991)
- Advisor: Paul A. Lagace
- Department of Aeronautics and Astronautics
Strain rate effects on tensile fracture and damage tolerance of composite laminates
Mak, Yew-Poh (1992)
- Advisor: Hugh L. McManus
- Department of Aeronautics and Astronautics
- Advisor: Christopher K.Y. Leung
- Department of Civil and Environmental Engineering
- Advisor: Paul A. Lagace
- Department of Aeronautics and Astronautics
An experimental investigation of "end-block" reinforcing in prestressed concrete beams
Tsavalas, George John (1959)
- Advisor: Myle J. Holley, Jr.
- Department of Civil and Sanitary Engineering
- Advisor: Joseph S. Newell
- Aeronautical Engineering Department
The effect of slenderness ratio upon axial and eccentric buckling in sandwich panels
Fioravanti, Aldo F. (Aldo Fiorino); Graziadei, James D (1948)
- Advisor: Albert Dietz
- Department of Building Engineering and Construction
The effect of diagonal stays on the natural frequencies of suspension bridges
Kahn, Charles Howard; McCormac, Jack C (1949)
- Advisor: Charles H. Norris
- Department of Civil and Sanitary Engineering