Theses most similar to Apparatus for simultaneous measurement of internal combustion engine ring/liner oil film thickness and friction (Dearlove, Janice Vivienne; 1994) read it
- Advisor: Jack L. Kerrebrock
- Department of Aeronautics and Astronautics
An experimental study of the oil evolution in critical piston ring pack regions and the effects of piston and ring designs in an internal combustion engine utilizing two-dimensional laser induced fluorescence and the impact on maritime economics
Vokac, Adam, 1978- (2004)
- Advisors: Henry Marcus; Tian Tian
- Department of Mechanical Engineering; Department of Ocean Engineering
Sources and characteristics of oil consumption in a spark-ignition engine
Yilmaz, Ertan, 1970- (2003)
- Advisors: Alan J. Brown, Victor W. Wong; John B. Heywood
- Department of Mechanical Engineering
Experimental study of engine oil film thickness dependence on liner location, oil properties and operating conditions
Tamai, Goro (1995)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering
Aeroacoustic measurement and analysis of transient supersonic hot nozzle flows
Kirk, Daniel Robert, 1975- (1999)
- Advisor: Ian A. Waitz
- Department of Aeronautics and Astronautics
Piston ring friction analysis from oil film thickness measurements
Deutsch, Eric J. (Eric Joseph) (1994)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Measurement of air temperatures and velocities in the fiber glass forming environment
McKeone, Brett M. (Brett Matthew), 1976- (1999)
- Advisor: John H. Lienhard, V., Joseph L. Smith, Jr.
- Department of Mechanical Engineering
Design and demonstration of a spark ignition engine operating in a stratified-EGR mode
Han, Sangmyeong (1997)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Effect of diameter ratios on flow through inlet valves of internal combustion engines
Falls, Richard G; James, Stephen W (1941)
- Advisor: A. R. Rogowski
- Department of Mechanical Engineering
- Advisor: Douglas P. Hart, Victor Wong
- Department of Mechanical Engineering