Theses most similar to Design of a fast cycle time hot micro-embossing machine (Dirckx, Matthew E; 2005) read it
- Advisor: David E. Hardt
- Department of Mechanical Engineering
On the development of a universal automated fixturing system through encapsulation techniques
Lee, Elmer C., 1973- (2001)
- Advisor: Sanjay E. Sarma
- Department of Mechanical Engineering
Fabrication process for openable microfluidic devices and externally actuated microfluidic switch
Cartas Ayala, Marco Aurelio (2008)
- Advisors: Daniel J. Ehrlich; Todd Thorsen
- Department of Mechanical Engineering
Centrifugal casting and fast curing of polydimethylsiloxane (PDMS) for the manufacture of micro and nano featured components
Mazzeo, Aaron D. (Aaron David), 1979- (2009)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
The development of an innovative bonding method for microfluidic applications
Lustrino, Michelle E. (Michelle Elizabeth) (2011)
- Advisor: David E. Hardt
- Department of Mechanical Engineering
Development of an encapsulation process for use in a universal automated fixturing system
Lee, Elmer C., 1973- (1999)
- Advisor: Sanjay E. Sarma
- Department of Mechanical Engineering
Design and measurement analysis of hot embossing system for high aspect ratio microfluidics
Ragosta, Nicholas (Nicholas Hiroshi) (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Hot embossing as a method for rapid prototyping microfluidic devices
Nguyen, Khanh H. (Khanh Huy) (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Design and process optimization of a hot embossing machine for microfluidics with high aspect ratios
Kalsekar, Viren Sunil (2013)
- Advisor: Brian Anthony
- Department of Mechanical Engineering
Development of a low-cost, rapid-cycle hot embossing system for microscale parts
Hale, Melinda (Melinda Rae) (2009)
- Advisor: David E. Hardt
- Department of Mechanical Engineering