Theses most similar to Numerical modeling of constant rate of strain consolidation tests (Lee, Yew Choong Patrick, 1975-; 2003) read it
Leading-edge analysis for correct simulation of interface separation and hydraulic fracturing
Barr, David Thomas (1991)
- Advisor: Jefferson W. Tester
- Department of Mechanical Engineering
- Advisor: Andrew J. Whittle
- Department of Civil and Environmental Engineering
Review of CPT based design methods for estimating axial capacity of driven piles in siliceous sand
Monzón A., Juan Carlos (Monzón Alvarado) (2006)
- Advisor: Andrew J. Whittle
- Department of Civil and Environmental Engineering
Undrained creep behavior of Atchafalaya clay from Cu direct-simple shear tests.
Williams, Charles Eugene (1973)
- Advisor: Charles C. Ladd
- Department of Civil and Environmental Engineering
Estimating settlements and capacities of piled foundations with non-linear finite element analyses
Pang, Derrick Yat Bond, 1976- (1998)
- Advisor: Andrew J. Whittle
- Department of Civil and Environmental Engineering
Laboratory evaluation of the constant rate of strain and constant head techniques for measurement of the hydraulic conductivity of fine grained soils
Adams, Amy Lynn (2011)
- Advisor: John T. Germaine
- Department of Civil and Environmental Engineering
A comparison of the behavior of intact and Resedimented Boston Blue Clay (BBC)
House, Robert Donald (2012)
- Advisor: John T. Germaine
- Department of Civil and Environmental Engineering
The effects of sample disturbance on preconsolidation pressure for normally consolidated and overconsolidated clays
Kontopoulos, Nikolaos S. (Nikolaos Stefanos) (2012)
- Advisor: John T. Germaine
- Department of Civil and Environmental Engineering
- Advisor: Andrew J. Whittle
- Department of Civil and Environmental Engineering
Implementation and evaluation of a recently developed rate-dependent effective stress soil model 'MIT-SR'
Sottile, Mauro Giuliano (2016)
- Advisor: Andrew J. Whittle
- Department of Civil and Environmental Engineering