Theses most similar to Diesel engine instantaneous oil consumption measurements using the sulfur dioxide tracer technique (Schofield, Douglas M. (Douglas MacLean); 1995) read it
- Advisor: John B. Heywood
- Department of Mechanical Engineering
Characterization of lube oil derived diesel engine particulate emission rate vs. lube oil consumption
Miller, Thomas C. (Thomas Charles) (1996)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
Effect of engine operating parameters and fuel characteristics on diesel engine emissions
Acar, Joseph, 1977- (2005)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering
Managing transient behaviors of a dual mode spark ignition-- controlled auto ignition engine with a variable valve timing system
Santoso, Halim G. (Halim Gustiono), 1975- (2005)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
Analysis of fuel behavior in the spark ignition engine start-up process
Sampson, Michael J. (Michael James) (1994)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
The effects of fuels on engine throttle transients
Bossert, Jean-Charles W. (Jean-Charles Wilfried) (1994)
- Advisor: Wai K. Cheng
- Department of Mechanical Engineering
The effects of lubrication system parameters and exhaust aqueous injection on diesel engine oil consumption and emissions
Ford, Eric J. (Eric John) (1995)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
Assessment of a sulfur dioxide based diagnostic system in characterizing real time oil consumption in a diesel engine
Jackson, Mark A. (Mark Alan) (1996)
- Advisor: Alan J. Brown, Victor W. Wong
- Department of Mechanical Engineering; Department of Ocean Engineering
The effect of carburetor refurbishing on emissions, performance, and fuel economy in a classic pickup tested using real-world tests
Holmes, Jacklyn (Jacklyn A.) (2010)
- Advisor: John B. Heywood
- Department of Mechanical Engineering
- Advisor: John G. Brisson
- Department of Mechanical Engineering