Theses most similar to Study of lubrication oil ignition in a rapid compression machine under sporadic pre-ignition conditions (Sullivan, Morgen Paul; 2015) read it

Effects of oxygenated fuels on DI diesel combustion and emissions

Hallgren, Brian E. (Brian Eric), 1976- (2000)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Emissions and in-cylinder combustion characteristics of Fischer-Tropsch and conventional diesel fuels in a modern CI engine

Sappok, Alexander G. (Alexander Georg) (2006)

  • Advisor: Alan J. Brown, Victor W. Wong
  • Department of Mechanical Engineering
Read it

Hydrocarbon oxidation in the exhaust port and runner of a spark ignition engine

Drobot, Kristine (1994)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Effect of directed port air flow on liquid fuel transport in a port fuel injected spark ignition engine

Scaringe, Robert J. (Robert Joseph) (2007)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Combustion chamber deposit effects on hydrocarbon emissions from a spark-ignition engine

Haidar, Haissam Ali (1997)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Development of a multi-regime tribometer and investigation of zinc dialkyldithiophosphate tribofilm development in the presence of overbased calcium sulfonate

Kariya, H. Arthur (Harumichi Arthur) (2009)

  • Advisor: Alan J. Brown, Victor W. Wong
  • Department of Mechanical Engineering
Read it

Fuel metering effects on hydrocarbon emissions and engine stability during cranking and start-up in a port fuel injected spark ignition engine

Castaing, Brigitte Marie Paule, 1977- (2001)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Data base generation and modeling of Homogeneous Charge Compression Ignition using a rapid compression machine

Ayala, Ferran A. (Ferran Alberto), 1976- (2001)

  • Advisor: John B. Heywood
  • Department of Mechanical Engineering
Read it

Mixture preparation, combustion, and HC emissions at different cranking speeds

Santoso, Halim G. (Halim Gustiono), 1975- (2002)

  • Advisor: Wai K. Cheng
  • Department of Mechanical Engineering
Read it

Syngas production using a catalytic engine

Arce, Andrea, S.B (2015)

  • Advisor: John G. Brisson
  • Department of Mechanical Engineering
Read it